News

Technological trials of Shebekinskaya industrialnaya khimiya, LLC on working out articles from a new Pielcolor Trendbook “Autumn/Winter 21-22”.
28.08.2020
The company Shebekinskaya industrialnaya khimiya, LLC (Russia) has prepared articles, which then will be presented within the frames of the exhibition “MOSSHOES-2020” in Moscow in September, 2020. Among them are full grain floater, full and corrected grain nappa and a wax article from a new Pielcolor Trendbook “Autumn/Winter 21-22”. Some new Pielcolor developments have been used in the wax article: a compound ML 2807 with good fastness, a fat polymer emulsion WA 0435 with “pull-up” effect, and glossy nitro-lacquer water based emulsion LA 6060, which gives good coating fastness....
Technological trials of Shebekinskaya industrialnaya khimiya, LLC of finishing recipes.
24.08.2020
The company Shebekinskaya industrialnaya khimiya, LLC has tested finishing recipes to match leather samples given by the customer. The finishing was made with the use of Pielcolor (Spain) products: glossy soft top urethane UR 1786 and fat polymer composition АТ 0300, which promotes aniline finishing. The trials were successful. The leather articles obtained were sent to the shoe factory to make shoes....

Technical Shebekinskaya trials by industrialnaya khimia, LLC at tanneries of Russia and Belarus on MAGIC LINE -2 materials (MAGIC products).

05-07-2016

in July 2016 Shebekinskaya industrialnaya khimiya, LLC (Russia) performed a series of trials at  tanneries of Russia and Belarus on recipes for obtaining patent leather, naplack, full grain nappa (for shoes), garment nappa with use of MAGIC LINE -2 materials (MAGIC products). Materials MAGIC (ML series) are compounds for basic coatings of various types of leather with a high covering power, excellent behavior during pressing and drum milling, and with natural touch. These compounds can be used only with the addition of the pigment and water. In the product line MAGIC LINE -2 a new polyurethane lacquer UR 1721 was developed, for patent finishings with high gloss. During the trials, the following materials were tested: ML 2803, ML 2804, ML 2806 and UR 1721. Of the greatest interest were the products ML 2803, ML 2806 and UR 1721. All tests were carried out under experimental conditions and were successful. According to test results some orders were obtained for the supply of the products: ML 2806, ML 2803, UR 1721 for production approval.

309290, Shebekino town, Belgorod region, Rzhevskoye shosse str., 16, Floor 3,
tel.: +7(47248)3-18-10; fax: +7 (47248) 3-91-45